Transfers
Sublimation Transfer Instructions
- Set temp on heat press to 400 degrees
- Set pressure to medium
- Press for 60 seconds
Please note! Not all heat presses are the same! You will need to test yours to find out what works best for you. Images on the paper will appear dull until pressed.
Sublimation must be used with at least 50% polyester on white or light colored fabric. The higher the poly count, the more vibrant the image.
DTF Transfer Application Instructions
- Preheat the garment for 15 seconds to remove excess moisture. Let the garment cool before adding the transfer.
- Place the transfer on the shirt – white side down, image facing up.
- Press at 325°F for 15 seconds under very firm pressure.
- Remove the garment from the press and let it stand until it is warm enough to peel.
- Peel warm or cool.
- Cover the image with parchment paper and press again for 15 seconds. You can use a Teflon sheet, butcher paper, or tissue paper.
Please note: If the image does not come off completely, repress with the image in place, let it cool, and re-peel the film.
Please note: Not all heat presses are the same! You will need to test yours to find out what works best for you.